Test Tube Heater
Introduction：
Test Tube Heater is a new generation of thermostatic device for heating applications. The equipment has 16, 20,or 40 holes (as required), applicable for 1.5ml to 10ml conical tubes. The device uses high-density block of aluminum alloy as heating material, featured with large capacity, small thermal resistance, uniform heating, and intelligent digital meter for temperature which could be set as needed, automatic thermostat, easy-to-use, and a 0-999 minutes timer.
Technical parameters:
Model name | SG |
Operating voltage | AC 220V 50HZ |
Heating power | 1000W |
Temperature range | Ambient±5℃-99.9℃ |
Temperature accuracy | ±1℃ |
Regular | 0-999min |
Capacity | Φ16mm*20 holes |
Heating material | aluminum alloy |
Temperature setting:
Press SET button to set or read temperature. Press SET for one time to see a digital flashing, indicating it enters temperature setting status, and by △ ▽ key to increase or reduce the value for needed one, then press SET another time to return to normal working status, temperature and time setting completed.
Caution:
1. The device must be electrically well-grounded.
2. Place the device in a flat table.
3. Don’t use flammability, explosives, corrosive substance, so to avoid fire or danger.
4. Don’t touch the block while it is very hot.
5. Be careful of the hot liquid in the tube.
6. Don’t use the device too long (such as over 10 hours) , so to lengthen its life.
7. Power off after use.
